Bitte geben Sie die Artikelnummer aus unserem Katalog ein.
Powered Radio Interface, MM005
Not just a simple radio interface. We use the latest electronic technology to enabled us to produce an efficient powered radio interface, with very low power consumption typically only 6mA , and all the features a pilot would require. The user can change various selectable features which reconfigure radio type (i.e. from type ‘A’ [Icom A20] to Type ‘BB’ [Icom A6]) etc, control intercom volume levels, mute audio levels, etc.
The voice reproduction through the intercom unit is very bright and clear, optimised for noisy environments. Connection to the mobile telephone is equally as clear and the Audio volume levels can be configured dependant upon what telephone or second radio you are connecting. You can also connect a Bluetooth enabled telephone using our MM006 Bluetooth adapter (optional accessory).
Fully specified with five LED status monitors showing power, TX, RX and headset batteries charged. Connect an airband radio, and for chatting to your flying group, a second PMR type radio can be connected at the same time. We recommend PMR the Alan 446 radio. Connection for mobile telephone is a standard feature. Stereo music input (twin audio-in for Hi or Low audio level) and separate stereo audio output. Twin PTT inputs, when P1 transmits the mic on P2 will mute and vice versa. User can select either 10v (Icom A6 etc) or 12 volt (Icom A3 etc) output to power the radio . User adjustable max intercom volume level and adjustable max mic TX level . Music, second radio, mobile telephone will mute automatically once the master radio receives an incoming signal. Auxiliary Control output for two colour LED on the dash board showing RX and TX (optional accessory). The interface comes pre-configured and ready to plug and go. The interface incorporates a batter monitor that turns the battery charging circuit of when headsets are fully charged, this extends the life of the headset batteries. There is a tone bleeper when you first press the PTT switch to indicate the PTT is activated. Our equipment can be connected to a Lynx Micro System or Vice versa.
Connect upto two radios at once
Mobile phone input
Hi Stereo Music Input (PCAS/ Music/ GPS audio)
Low Audio input (PCAS/ Music/ GPS audio)
Line out recording Output
Auxiliary LED indicator
Powers radio from the interface
Micro Amp power. Typically 3mA per headset connected, when using main supply connected.
LED lights show,
1. Pilot headset batteries full charge indicator.
2. Co Pilot headset batteries fully charged indicator.
3. RX LED.
4. TX LED.
5. Ignition power on.
Switchable 10v or 12v output for all Icom radios.
Automatic soft audio muting circuit. Mutes second radio, music, & telephone when the master radio receives a transmission.
User adjustable, TX mic gain & EQ adjuster, intercom max volume adjuster, muting sensitivity.
Radio Interface unit
Ignition Power supply lead, no need to connect power as the interface will use the headset power.
Mobile telephone lead.
Stereo Audio input/ output lead.